When selecting a bomber jackets, even before you begin comparing the many jacket styles and features available to you, it’s a good idea to first consider which jacket material best suits you and the way you ride.
You have three motorcycle jacket materials to choose from…
- High-tech synthetics…
The material you choose should suit the…
- Type of riding you enjoy most…
- Type of motorcycle you ride…
- Typical daily biking miles you travel…
- Weather conditions in which you ride…
- Seasons when you like to ride…
- Types of roads or trails you enjoy most…
Here’s info to help you compare each jacket material’s qualities and features and its ability to…
- Protect you in an accident…
- Keep you comfortable…
- Fit your riding style…
Leather jackets come in many styles to suit the types of riding you enjoy and the seasons when you ride.
Also, leather jackets look good.
A leather jacket will keep you safe and comfortable for many years if you occasionally apply a cleaner/preservative to keep it clean and soft and prevent it from becoming dry and brittle.
You can rely on a leather to give you great abrasion protection if you have an accident.
But leather alone won’t absorb hard falls onto your shoulder or elbow if you have an accident. To gain the advantage, you need strategically placed armor or padding on these impact-prone areas.
Leather will block cold winds and keep out mild rain and damp weather.
But, unless your jacket is lined with a waterproof material such as Gore-Tex, or the leather has been specially treated to make it water resistant, you must wear a rain jacket over your leather jacket to keep it dry and prevent water from seeping through.
On hot days, your leather jacket — especially a black jacket — that isn’t well-ventilated and exposed to a direct breeze when you ride can become very hot and uncomfortable.
Leather jackets tend to be snug and form-fitting. This keeps out drafts and prevents the material from flapping in the wind. But it also restricts your ability to wear extra layers underneath on cold days.
A motorcycle jacket made of synthetic textiles such as nylon, polyester or Kevlar can be thinner, cooler, lighter, more flexible and more comfortable than a leather jacket.
Such benefits are important if you prefer a loose-fitting garment and — to some degree — if you’re concerned about riding in hot weather.
However, when it’s cold outside, you need an insulating layer underneath your synthetic textile jacket to keep you warm. Most synthetic jackets come with such a layer that you can remove in hot weather.
Synthetic materials resist mildew and are easy to wash and keep clean.
But they’re not waterproof. So when riding in the rain, you need a jacket with a waterproof lining — such as Gore-Tex. Otherwise, you can cover up with a rain jacket.
Nylon and polyester won’t protect you from abrasions if you hit the ground. Both materials will tear or wear through when scraped against a rough road surface.
But jackets made entirely of Kevlar can prevent road rash, especially on your elbows, shoulders and other abrasion-prone areas.
But, just like leather, synthetic textiles won’t absorb the impact if you hit the ground hard. That’s why most synthetic jackets have armor padding on elbows and shoulders. Many have built-in spine protectors.
Jackets made of synthetic fibers tend to fit loosely. But most have well-placed tabs and straps that let you tighten things down and customize the fit. This capability enables you to wear extra clothing underneath — or not — according to the weather.
Cotton/denim motorcycle jackets tend to be airy, comfortable and will keep you cooler than leather or synthetic textile jackets.
Motorcycle jackets made of these materials give you lots of value and many nice features.
But because these natural materials by themselves give you virtually no abrasion or impact protection, such protection must be built in.
You can find cotton/denim jackets that have impact-absorbing padding or armor on the elbows and shoulders and protecting your spine.
But even with such protection, well-built leather and synthetic fiber jackets have the edge over cotton/denim when it comes to abrasion prevention.
Cotton/denim fibers are not waterproof. So, if you ride in all sorts of weather, you’ll need a rain jacket.
When you start trying on different types of motorcycle jackets, it’s good to know what each material offers. This awareness make selecting the right jacket for you that much easier.
Here’s where you can get more info to help you choose a motorcycle jacket and other riding gear, and info that will help you to get the most enjoyment out of motorcycle riding.
Quilted jackets for women allow you to stay on top of fashion while having fun on daily basis without freezing in cold during winter seasons. While purchasing this jacket, one should make sure it fits the wearer perfectly and nicely to prevent any chilly air from passing through the jacket. In short, every woman’s wardrobe should be equipped with quilted jackets to stay up to date on fashion trends.
Steel barricades accessorized with vinyl jackets are becoming an increasingly common sight at venues and events nationwide. When they feature jackets (also sometimes called covers), crowd control barriers not only serve their practical purpose, but also function as an effective marketing or communications tool.
As cited earlier, the most popular style of barrier jacket is one printed with a logo, or with a worded message. Text or logos can be placed anywhere on a jacket. When jackets are printed using the latest technology and attention to detail, the end result is attractive artwork that conveys a professional, market-focused image. A logo calls attention to the “visual identity” of a company or event. Thus, a barrier jacket compliments other, more traditional marketing/promotional activities.
Solid Color Jackets
Even with the option of printing logos or messages on jackets, some sites prefer to spruce up their barriers with a simple color jacket. Why? The goal of a jacket in a single solid color (which is how the first barrier jackets were produced in the mid-1980s) is straightforward – to make barriers more colorful and attractive. It is an aesthetic solution, rather than a marketing one. Single color jackets result in more attractive barriers, without the expense or logistical work necessary to produce a printed jacket.
Many venues which use solid color jackets do so because they want to use the barriers to convey simple directional or instructional messages which are attached to the jacket via hook-and-loop fastener. “Parking,” “Exit,” and “Season Ticket Holders Only” are some examples of wording which is placed on a jacket. Directional arrows are also often utilized to point patrons in the right direction.
Barrier jacket options have increased substantially over the last 20 years, from single color to elaborate designs. Now, a number of different barricade jacket sizes and styles exist to serve a wide span of applications for differing events or venues. Because of their attractive and pervasive marketing potential, multi-color covers featuring logos or advertising messages continue to increase in popularity. Knowing all of today’s options will help your site choose the jackets which will most effectively increase the value of your steel barricades.